si instruments

Address: 256 South Road, Hilton SA 5033, Australia
Phone: (08) 8352 5511


LPP 08 / LR-Cal / Pressure Test Pump +8bar


LPP 08

The pressure test pump LR-Cal LPP 08 is used to generate pressure and vacuum for checking, adjusting and calibrating mechanical and electronic pressure measuring instruments by comparative measurements in the low-pressure and vacuum range. The pressure tests may be carried out in laboratories, workshops or on site at the measuring point.

When the instrument to be tested and a sufficiently accurate reference measuring instrument are connected up to the pressure test pump, the same pressure is applied to the two measuring instruments when the pump is operated. By comparing the two measure values at random pressure values, the accuracy can be verified or the unit under test can be adjusted.

The LR-Cal LPP 08 is a pneumatic pressure test pump for low-pressure ranges up to 8 bar with change-over switch to vacuum down to -850 mbar. Despite its compact dimensions, the pressure test pump is easy to operate and allows for exact generation of the required test pressures. The maximum pressure or vacuum achievable depends on the attached test volume. The smooth-running pressure generation and the integrated fine adjustment valve allow a safe and precise setting of very small positive resp. negative pressure values in the range of mbar.


Pressure Test Pump +8bar LPP08 Brochure

Pressure Test Pump +8bar LPP08 Operating Manual

LR Pressure Instruments Portable Pressure Calibration LPP-KIT Brochure

LR Pressure Instruments - Product Overview Brochure

LR Pressure Instruments - Pressure Calibration Overview Brochure