si instruments

Address: 256 South Road, Hilton SA 5033, Australia
Phone: (08) 8352 5511
Email: info@si-instruments.com.au

Supplier

LPP 40 / LR-Cal / Pressure Test Pump +40bar

Specifications

LPP 40
LR-Cal

The pressure test pump LR-Cal LPP 40 is used to generate pressure and vacuum for checking, adjusting and calibrating mechanical and electronic pressure measuring instruments by comparative measurements. These pressure tests may be carried out in laboratories, workshop or on site at the measuring point.

When the instrument to be tested and a sufficiently accurate reference measuring instrument are connected up to the test pump, the same pressure is applied to the two measuring instruments when the pressure test pump LR-Cal LPP 40 is operated. By comparing the two measure values at random pressure values, the accuracy can be verified or the instrument under test can be adjusted.

Despite its compact dimensions, the pressure test pump LR-Cal LPP 40 is easy to operate and allows for exact generation of the required test pressures; a change-over switch enables the generation of vacuum as well. The LR-Cal LPP 40 is fitted with a fine adjustment valve for generation of high pressure and a precise adjustment of pressures.

The reference instrument is screwed directly on the top of the pump and the unit under test is connected by means of the connection tube incorporating an adapter 1/4" BSP female thread (freely rotating), contained in the scope of delivery.

Downloads

Pressure Test Pump +40bar LPP40 Brochure

Pressure Test Pump +40bar LPP40 Operating Manual

LR Pressure Instruments Portable Pressure Calibration LPP-KIT Brochure

LR Pressure Instruments - Product Overview Brochure

LR Pressure Instruments - Pressure Calibration Overview Brochure